ford74
Trainee ZX2ner
Posts: 132
|
Post by ford74 on May 10, 2019 18:31:56 GMT -5
Driving home from work my cooling fan stopped working I figured it just went bad replaced it with one from my other zx2 that I know is good still wouldn't work ,replaced the temperature sensor with the one from the other car too still wouldn't work,but when unplug the sensor with the car running the fan will run continuously but at high speed. O and the temp gauge stays pegged over hot with the car on or off Has anyone had this problem before or have any knowledge to add?
|
|
|
Post by TheEvilZX2 on May 13, 2019 15:11:20 GMT -5
CCRM houses the relay for the fan. it must have died.
|
|
zooli
New ZX2ner
Posts: 2
|
Post by zooli on Mar 4, 2020 1:32:38 GMT -5
Check your ccrm like stated above, you can also check your coolant temperature sensor and also your crankshaft position sensor. My 2001 was the crankshaft sensor
|
|
|
Post by felixkoch2312 on Feb 24, 2021 10:26:48 GMT -5
CCRM houses the relay for the fan. it must have died. Yeah I was also thinking that.
|
|
drew
Early Adopters
Posts: 195
|
Post by drew on Mar 4, 2021 19:40:21 GMT -5
also which sensor did you change? there is one on top of the housing and one on the bottom.
|
|