|
Post by krux303 on Dec 16, 2019 18:41:01 GMT -5
Anyone replace rack bushings with energy suspension? Any advice on the process? Easy I take it?
|
|
|
Post by TheEvilZX2 on Dec 19, 2019 17:04:59 GMT -5
I havent done the rack bushings yet, planned on starting the trans swap today and was going to swap in my depowered rack while the trans was out. I know its possible to do with everything in the car though.
But ive been sick the past couple days and I still feel like shit. So I'll get on that when I can and let you know what I think.
|
|
|
Post by krux303 on Dec 19, 2019 17:24:13 GMT -5
I got the bushings today, they should be very easy to swap in. The picture online showed one of the pieces as a solid piece, however it is cut. This will be an easy "unbolt" and "bolt" back in.
Hopefully this weekend is warm enough in which I can install my new energy bushings for the shifter, rear sway bar, front sway bar and rack. I already have the motor mounts and I love them.
|
|
|
Post by TheEvilZX2 on Dec 19, 2019 17:33:16 GMT -5
ive had an ES master bushing kit for years and usually only replace stuff as it fails. the stock rack bushings are still good....ive got alot of bushings on the turbo car that are still stock lol
|
|
|
Post by krux303 on Dec 19, 2019 19:06:25 GMT -5
ive had an ES master bushing kit for years and usually only replace stuff as it fails. the stock rack bushings are still good....ive got alot of bushings on the turbo car that are still stock lol My bushings are in great shape but energy suspension makes such a big difference. I feel that at 20 years old, time for a refresh.
|
|